Excellent resistance against corrosive material and erosive natural soil
No need for linings, coatings, cathodic protection, wraps or other forms of additional corrosion
Selection of compatible Resin based on fluid application
Capability to sustain high pressure and buckling for UG application
High amount of UV Stabilization and Low Thermal Application for AG application
Flexibility of modification within a short duration
Superior hydraulic characteristics
Easy installation using coupler joints
Fast execution & Completion of projects in time
Technical Specification
Our pipes, fittings and liners are ID based and cover a wide range of applications and sizes.
Design Standards
Major Design Standards (As Applicable): AWWA M45, BS 6464, BS 7159, ASTMD 3982, IS0 14692, API 15LR, ASMEB 31.3, DIN 16965 & 16966, AS 2634
DN, PN, SN Class
As per BIS code Diameter Range: 200 mm to 3000 mm
As per AWWA code Diameter Range: 25 mm to 3600 mm
As per ISO code Diameter Range: 50 mm to 4000mm
As per BIS code Pressure Range: 3, 6, 9, 12 & 15 Bar
As per AWWA Pressure Range: 50 psig to 450 psig (0.345 Mpa to 3.103 Mpa)
As per ISO code Pressure Range: 1 Bar to 32 Bar
As per BIS code Stiffness Class: 62, 124, 248, 496 Kpa (A,B,C & D respectively)
As per AWWA Stiffness Class: 62, 124, 248, 496 Kpa (A,B,C & D respectively)
As per ISO code Stiffness Class: 630 (only for special applications), 1250 (only for special applications),2500,5000,10000 N/m2 (supplied based on requirements)
Size
Pipes are available in various lengths from 3.0 meter to 12.0 meter as required.
Material of Construction
Polyester Resin
Vinyl Ester Resin
Superior Grade Vinyl Ester Resin
Isophthalic Resin
Epoxy Resin
Fiberglass
Quality Specifications
As per BIS Specifications: IS 12709 & IS 14402
As per AWWA Specifications: AWWA C 950
As per ISO Specifications: ISO 10639 & ISO 10467
For High Pressure Applications: ASTM D 2996
For Oil & Petroleum Sector: API 15 LR up to 1000 PSI
For Thermoplastic Liner with GRP: DIN 16965 & DIN 16966